When you click on a product code (EWEB-xxxx) the technical specifications of the product will open in Portable Document Format (PDF) document in a new browser window.
 

HEATING PRODUCTS
EWEB 6100 – 230V Heating Products  
The 9E Heater is a 230Vac 1500W heater. The heat is generated by 1 x 1500W element. This element has a thermal cut-out switch on for safety precautions.
EWEB 6101 Get Quote
     
The 11E Heater is a 230Vac 750W heater. It has 4 switching positions; off, high fan, low heat, high heat. The heat is generated by 4 x 750W elements. All these elements have thermal cut-out switches on them for safety precautions.
EWEB 6102 Get Quote
     
The 8E Heater is a 230Vac 3 phase 750W heater. It has 4 switching positions; off, high fan, low heat, high heat. The heat is generated by 3 x 750W elements. All these elements have thermal cut-out switches on them for safety precautions.
EWEB 6103 Get Quote
     
EWEB 6150 - 6200 – Under Seat Heaters    
600V 750Watt    
The heater system is constructed of a robust sheet metal enclosure specially made to accommodate the heating element, fan, temperature sensor, and the full-bridge driver. The latter provides a stable 28Vac output to the fan with a supply varying between 60Vdc and 160Vdc. A double lid makes the heater front cover safe for all commuters.
EWEB 6151 Get Quote
     
The heater system is constructed of a robust sheet metal enclosure specially made to accommodate the heating element, fan, temperature sensor, and the full-bridge driver. The latter provides a stable 28Vac output to the fan with a supply varying between 60Vdc and 160Vdc. A double lid makes the heater front cover safe for all commuters
EWEB 6152 Get Quote
     
The heater system is constructed of a robust sheet metal enclosure specially made to accommodate the heating element, fan, temperature sensor, and the full-bridge driver. The latter provides a stable 28Vac output to the fan with a supply varying between 60Vdc and 160Vdc.
EWEB 6153 Get Quote
     
750V 750Watt    
The heater system is constructed of a robust sheet metal enclosure specially made to accommodate the heating element, fan, temperature sensor, and the full-bridge driver. The latter provides a stable 28Vac output to the fan with a supply varying between 60Vdc and 160Vdc. A double lid makes the heater front cover safe for all commuters
EWEB 6201 Get Quote
     
The heater system is constructed of a robust sheet metal enclosure specially made to accommodate the heating element, fan, temperature sensor, and the full-bridge driver. The latter provides a stable 28Vac output to the fan with a supply varying between 60Vdc and 160Vdc. A double lid makes the heater front cover safe for all commuters
EWEB 6202 Get Quote
     
EWEB 6250 – 74V Heating Products    
The heater is constructed of a robust sheet metal enclosure specifically made to accommodate the heating element, fan, temperature sensor controller and temperature controller. Air is drawn in and blown out of a mesh structure cut into the casing, creating a durable and safe cover to prevent injury to personnel and damage to equipment.
EWEB 6252 Get Quote
     
The heater is constructed of a robust sheet metal enclosure specifically made to accommodate the heating element, fan, temperature sensor controller and temperature controller. Air is drawn in and blown out of a mesh structure cut into the casing, creating a durable and safe cover to prevent injury to personnel and damage to equipment.
EWEB 6253 Get Quote
     
EWEB 6300 – 110V Heating Products    
The complete system consists of 4 units, namely; bottom plenum box, top plenum box, fresh air inlet and heater/blower. Also included is 3m of air hosing for connection. When correctly installed, these units work together to supply heated or unheated air provided by the heater/blower to the two plenum boxes, using fresh air from the inlet.
EWEB 6301 Get Quote
     
The bottom plenum box, or foot box as it is also known, has two individually adjustable outlets, allowing the operator to adjust airflow on both axis', or to stop airflow entirely should this be required. The unit requires no connection other than an air-pipe to the heater/blower to the two plenum boxes, using fresh air from the inlet.
EWEB 6301 - Bottom Plenum Get Quote
     
The top plenum box is mounted on the dashboard of the coach, in such a manner that its 3 top outlets face the windscreen and the bottom 3 outlets the operator. The outlets are individually adjustable to lower or lift the beam of airflow through a specific outlet. This allows the unit to demist the windscreen when required, while at the same time providing heat to the cabin. The outlets are spaced evenly over the length of the unit, allowing the unit to spread the airflow more evenly.
EWEB 6301 - Top Plenum Get Quote
     
The fresh air inlet is mounted on the side of the vehicle, and draws in fresh air from the outside of the vehicle. The air passes through a filter before it is drawn into the heater/blower unit to be heated and spread to the plenum boxes. The filter is mounted so as to be easily replaceable, and the vents are designed to prevent water from entering the system and clogging or dirtying the filter.
EWEB 6301 – Heater Blower Get Quote
     
The heater/blower is the main unit of the system. It is the only unit that requires a power connection, making installation easier and more cost-efficient. It houses the fan that enhances the airflow of the system, the 2 elements for heating the air as well as the built-in protection systems. A selector switch (usually mounted in the control panel) can be wired to the unit to allow one of the following settings to be selected; off, high fan, low heat, high heat. The high fan setting switches on the fan only, supplying only cold air to the plenum boxes. The low heat function switches on the fan as well as one of the elements, the high heat function will switch on an additional element, providing the plenum boxes with heated air.
EWEB 6301 – Filter Box Get Quote
     
The 7E Heater is a 100Vac 1500W heater. It has 5 switching positions; off, low fan, high fan, low heat, high heat. The heat is generated by 4 x 375W elements. All these elements have thermal cut-out switches on them for safety precautions.
EWEB 6302 Get Quote

Price Request Form


 

The PRODUCT CODE referred to above is the EWEB-**** number you see listed with all products.